| 目錄 Contents |
陳東陽
T. Y. Chen |
危機處理歷程中「道德危機」的反思與邏輯推導
The Reflective Thinking and Logical Modeling on Moral Crisis Existed in the Processes of Crisis Management |
1 |
劉紹宇、張哲強
S. Y. Liu and J. C. Chang |
公務航空機構成員對組織安全文化認知之探討
Preliminary Study on Employees’ Cognition on Safety Culture on Governmental Organizations |
9 |
韓慧林、王貴民、劉佩葶、
蔡齡葦、劉姵吟、方鄒如
H. L. Hai, K. M. Wang, P. T. Liu,
J. Tsai, P. Y. Liu, and T. R. Fang |
ISO27001認證之關鍵成功因素評估
Assessing the Critical Success Factors of ISO 27001 Certification |
21 |
吳明上
M. S. Wu |
從歷屆懇談會報告書看日本防衛政策與美日安全保障關係的變化
The Changes of Japan’s Defense Policy and U.S.-Japan Security Alliance: The Study on the Reports of Advisory Group on Defense Issues |
33 |
吳富堯、李婕漪、徐鈺茹、王宏凱
F. E. Wu, C. Y. Lee, S. Y. Ru
and
W. H. Kai |
運用風險管理探討模具品質與製造
The Study of Improving Tooling Quality by Using Risk Management |
45 |
葉俊賢、楊龍隆
J. H. Yeh and L. L. Yang |
模糊品質評級方法建立之研究
The Study on the Establishment of Fuzzy Quality Evaluation Method |
53 |
吳富堯、李蓉姍、吳侑庭
F. E. Wu, J. S. Li and Y. T. Wu
|
運用風險管理預防居家淹水之災後損失
The Study of How to Immigrate Flood Damage by Using Operational Risk Management |
63 |
洪僖黛、曾全偉、廖柏凱
H. T. Hung, C. W. Tzeng, and
P. K. Liao |
塑膠模具開發關鍵失效因素之分析與探討
Analysis and Discussion of Key Failure Factors for Plastic Injection Modes |
69 |
陳俊益、吳全成、王敏吉
C. I. Chen, C. C. Wu and
M. C. Wang |
應用危害鑑別與風險矩陣方法評估某鋼鐵廠之不可接受危害因子及改善方案
Apply the Hazard Identification and Risk Matrix to a Steel Factory for Evaluating the Unacceptable Hazard Factors |
77 |
王貴民、韓慧林、張佑瑋、
曾秉祥、王韋程、葉德芳
K.M. Wang, H.L. Han, Y.W. Zhang, B.X. Zeng, W.C. Wang
and D.F. Ye |
天然災害情境下救援最快路徑之最適化分析
The Optimal Analysis of the Fastest Route in Natural Disaster Scenario |
89 |